Hỡ trợ trực tuyến

Hỗ trợ trực tuyến

Mr Long - 0932.074.072


My status
DJ & LIVE SYSTEMS
Bar, Beer club, Restaurant, ......
Giải pháp tối ưu cho âm thanh PA
HỆ THỐNG ARRAY NHỎ VỚI CẤU HÌNH KHỦNG MADE IN ITALY
HỆ THỐNG ÂM THANH LINE ARRAY CHUYÊN NGHIỆP ĐẾN TỪ ITALY
Danh Mục Sản phẩm
FANPAGE FACEBOOK
Chi tiết sản phẩm
  • GT 2.5
  • Giá : Liên hệ
  • Chi tiết sản phẩm
  • Thông số kỹ thuật

GT 2.5

 

The GT 2.5 is a digital amplifier module of last generation class D with 1 channel 2500 W / 4 Ohm. Includes digital processor with XLR input and output + USB and Ethernet connectors. Incorporated into different subwoofers of Pro DG Systems. Ideal for different systems configurations and multiple applications.

 

(Software available)

TECHNICAL SPECIFICATIONS:

Power Ratings (RMS @ 1% THD @ 230Vac) Channel 1: 4 Ω / 2500 W - 8 Ω / 2000 W
Output Circuitry UMACTM Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage Channel 1 on GT series: 160 Vp / 320 Vpp unloaded All other channels: 80 Vp / 160 Vpp unloaded
Amplifier Gain Channel 1 on GT series: 32 dB All other channels: 26 dB
Signal To Noise-Ratio > 120 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load)
THD+N (typical) < 0,05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8 Ω load, 1 dB below rated power)
Damping Factor > 900 (8 Ω load, 1 kHz and below)
Protection Circuits Input limiter, short circuit protection, DC protection of output, under & over voltage protection, intelligent mains fuse protection, power stage overload protection, temperature protection of transformers and heat-sinks
Readouts for DSP/Network Protect/Disable (mute), Heatsink temperature, Clip (for each channel), Output voltage (for each channel), Output current (for each channel), SMPS Limit (power supply limiter)
Power Supply URECTM universal & regulated switch mode power supply Operation Voltage Universal Mains, 85-268V (dual voltage auto selection)
Control Options Sleep Mode (only +7 V live), Disable outputs (mute), Temperature reduction ON/OFF
Aux. Power for DSP ±15 V (150 mA), +7 V (1 A, delivered by standby power supply)

Dimensions (HxWxD): 265 x 483 x 105 mm / 10.43 x 19.02 x 4,13 in
Weight : 6,1 kg /13,44 lbs